SHIFT BOOT

1. 1. To get the top off remove the five phillips head screws and pop the top off with a pry tool.

2. These clips are a little firm. Don't be afraid to man handle them.

3. Take the assembly to a working table. Glue the cover over the factory one (do not remove it!) Since the sliding assembly is not dis-assemblable, the cover will reach all the way to the plastic, but not be pushed underneath it. Since you rarely inspect the armrest from below, this shouldn't be much of an issue. :) For detailed instructions on how to glue the armrest cover on top, refer to this write-up.

Make sure it's glued evenly and wrinkle-free.

Reinstall in the reverse order of removal.

CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!

Useful tip

You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.

Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.