1970-24 B&M MEGASHIFTER
shift boot installation guide

1. Remove the four screws attaching the rubber boot. Remove the rubber factory boot. Unscrew the shifter handle.

2. Flip the RedlineGoods boot inside out and slide it on the shifter thin end (collar) first. Align it correctly and attach the boot's collar to the respective groove on the shifter use a zip-tie.

3. Pull the bottom of the leather boot back down, at the same time flipping it back to the right side.

4. Align new boot correctly in the opening. The skirt on the RedlineGoods boot will go under the metal bracket. You can, but don't have to, use double-sided tape or glue to attach the bottom of the RedlineGoods boot.

5. Reattach the bracket with screws, effectively sandwiching the leather boot underneath it.

CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!

Useful tip

You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.

Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.